Difference between revisions of "Zones"
From Rhessys
Jump to navigationJump to searchm (added units description to ndep in zone def) |
|||
| Line 30: | Line 30: | ||
| min_rain_temp||Minimum temperature at which precip falls as rain||º C | | min_rain_temp||Minimum temperature at which precip falls as rain||º C | ||
|- | |- | ||
| − | | ndep_NO3||Nitrogen depostion as NO3|| | + | | ndep_NO3||Nitrogen depostion as NO3||kg m-2 yr-1 |
|- | |- | ||
| lapse_rate_tmin ||Minimum temperature lapse rate with elevation (defaults to lapse rate) ||º C/meter ** | | lapse_rate_tmin ||Minimum temperature lapse rate with elevation (defaults to lapse rate) ||º C/meter ** | ||
Latest revision as of 20:21, 10 February 2012
| Variable Name | Description | Units |
| zone_default_ID | Unique identifier used by zone objects to indicate zone default | unique value for each default file |
| atm_trans_lapse_rate | Lapse rate of atmospheric transmissivity with elevation | 1/metre |
| dewpoint_lapse_rate | Lapse rate of dewpoint with elevation | º C /metre |
| max_effective_lai | Maximum effective lai to be used with lai temperature adjustment | metres/metres |
| lapse_rate | Temperature lapse rate with elevation | º C /metre |
| pptmin | Minimum precipitation to intiate cloud cover | metres |
| sea_level_clear_sky_trans | Sea level clear sky transmissivity | range (0 - 1) |
| temcf | Daylight average temperature coefficient | dimensionless (0.212 if sine from assumed) |
| trans_coeff1 | Coefficients used in calculation of atm. transmissivity adjustment | dimensionless |
| trans_coeff2 | Coefficients used in calculation of atm. transmissivity adjustment | dimensionless |
| wind | Wind speed | metres / s |
| max_snow_temp | Maximum temperature at which precip falls as snow | º C |
| min_rain_temp | Minimum temperature at which precip falls as rain | º C |
| ndep_NO3 | Nitrogen depostion as NO3 | kg m-2 yr-1 |
| lapse_rate_tmin | Minimum temperature lapse rate with elevation (defaults to lapse rate) | º C/meter ** |
| lapse_rate_tmax | Maximum temperature lapse rate with elevation (defaults to lapse rate) | º C/meter ** |
"**" optional - if not included default value used
